Suitable for use with the compact core drilling machine, this range of core bits comprise a thin-wall tube 450 mm long with a series of cutting segments formed from diamond abrasieve set in specilly formulated hard matrix. The solid back end includes a threaded fitting to connect to the waterswivel assembly of the core drill.
Percentage Refusal Density (PRD) is defined as the ratio of the initial dried bulk density of the sample to the final density (refusal density) expressed as a percentage. The sample bulk density is determines by weighing in air and water. It is then heated in a split mould and compacted to refusal using a vibrating hammer. The final compacted density is obtained by weighing in air and water.
Fixed Beam, Alumunium profile frame, 3 points adjuster, with vibrator and dial holder.
The equipment used to extract the bitument form hot-mixed paving mixtures.
This machine is designed ruggedly constucted automatic compactor provides a consistent and even degree of compaction, the unit comprising pedestal with laminated Hardwood Block secure to concrete base by 300 mm square x 25 mm thick steel plate. Specification : 1. Frame Machine : - Power requrement : 220 V-AC. - Electromotor power for driven sliding mass : 800 watt, 1 phase. - Digital Counting system with key button to adjust of blows frequency. 2. Hammer Sliding Mass : - Weight : 4535 gr. - Height of drop : 457 mm - Compaction foot diameter : 98.52 mm. 3. Pedestal - Hard wood block : 200 mm square 450 mm height. - Density : 550 to 650 kg/m3. - Steel Base Plate : 300 mm square x 25 mm thick. 4. Compaction Mould 4" dia : 1 set, includes in this set of equipment. - Compaction foot and rod : 3560 gr. Optional if required : - Compaction Mpuld 6" for Modified samples complete with compaction foot. Dimension (l x w x h) : 535 x 535 x 1880 mm Gross weight : 250 kg
SPECIFICATION POWER SOURCE : Electromotor 3 Phases 3 Hp 4 Pole; LOW VOLTAGE : 220 V / 380 V / 50 Hz; HAMMER BLADE : 4 Pieces made of Special Hardened Steel; SCREEN : dia 5-6m/m
SPECIFICATION POWER SOURCE : GEAREDMOTOR, 3 Phases 0,5 Hp / 0,4 kw 20-380 V, 50 Hz, 4 Pole, OUTPUT : 20 Rpm; BALL GRINDER : 8 Pieces Steel Ball, 1" Diameter COMPLETE WITH DIGITAL PRESET COUNTER, AND THREE OPTIONAL LOADER
SPECIFICATION POWER SOURCE : Electromotor 3 Phases 7,5 Hp / 5 Kw 220-380 V, 50 Hz 4 Pole; JAW FACE : Swing : 43 x 9,5 x 3,3 cm Fix : 32 x 23 x 3,2 cm; CAPCITY : 2000 Kg/hour; ROTATE : 450 Rpm
SPECIFICATION POWER SOURCE : Electro motor 3 Phases 5,5 Hp / 4 Kw / 4 Pole 220-380 V, 50 Hz ; ROTATE : 1400 Rpm; JAW FACE : Two Pieces made of Manganese Steel CAPACITY : Setting; Coal size : 3/8" 1/4" 1/8" 1/16"; Capacity : 1000 kg 750 kg 600 kg 450 kg
SPECIFICATION POWER SOURCE : Electromotor 3 Phases 2 Hp / 1,5 Kw / 4 Pole 220-380 V - 50 Hz ; JAW FACE : Two Pieces made of hardened iron; Steel : 22 cm Length : 7,5 cm Thick : 1,2 cm; CAPACITY : 100 Kg/hour depend on the type of sample; WEIGHT : 250 kg; RPM : 450