Hydraulic Hand Pump Compression Machine 2000 kN. Capacity : ASTM C-39. For determining compressive strength of concrete cube 15 x 15 x 15 cm : or concrete cylinder 15 diameter x 30 cm height. Frame: Heavy-duty welded steel construction 30 cm profile, steel columns 10 cm thick bottom and upper plate. Hydraulic System For 1500 kN Cap: Cast iron cylinder, Hard-chromed piston, 230 mm diameter, Maximum working pressure 50.000 kPa, Overal dimension 280 mm dia. X 320 mm height, Single action, gravity return. Hydraulic System For 2000 kN Cap: Mild-Steel cylinder, Hard-chromed piston, 230 mm diameter, Maximum working pressure 50.000 kPa, Overal dimension 300 mm dia. X 320 mm height, Single action, gravity return. Hydraulic System For 3000 kN Cap: Mild-Steel cylinder, Hard-chromed piston, 250 mm diameter, Maximum working pressure 50.000 kPa, Overal dimension 330 mm dia. X 320 mm height, Single action, gravity return. Hydraulic Pump: With Single-acting cylinders all metal construction, Carrying handle and large oil fill port Non-vented reservoir. Max. Handle effort is 130 lbs. Volume type 2 way, max press stages 1 st 325 Psi. 2nd 10.000psi, vol per stroke 260.160 (cu.in). Reservoir cap: 152 Cu.in: usable 137 Cu.in, 0.1 Port 3/8" NPTF Prod wt 26.2 lbs. Force Gauge: Bourdon tube manometer, 280 mm dial diameter, With maximum load pointer. Steel box housing. Compressive Upper: 180 x 180 mm, bail seating. Platen Lower: 250 mm diameter. Clearance Horizontal: 290 mm, Vertical : 310 mm.
Hydraulic Electric Pump Compression Machine 2000 kN. Capacity : ASTM C-39. For determining compressive strength of concrete cube 15 x 15 x 15 cm : or concrete cylinder 15 diameter x 30 cm height. Hydraulic Pump: With Single-acting cylinders, value with holds pressure in the closed position builds pressure to 10.000 psi in the release position with the motor running and automatically release pressure when the motor is shut off metal reservoir. Value2 way no.9517, function advance return (Auto) control switch remote motor control (10ft) on/off motor 1.2 Hp 220V, 50 Hz single phase. Cap 21/2 gal usable 375 cu.in
ASTM C-78
For determining the fleural strength of concrete beam.
Specification :
Using simple beam with thrid poin loading
Sample size 15 x15 x 60 cm
Welded steel construction
Cap 100 KN
The combination of concrete compression testing machine
and the concrete beam testing machine, supported by a
hydraulic pump and dual gauge depending on. The applications
needed and refer to the ASTM C-39 and ASTM C-78.
ASTM C-143 / AASHTO T-119
For determining slump/ workability of concrete both
in the laboratory and in the field.
ASTM C-231 / AASHTO T-152
For determining the air content of freshly mixed
Concrete from observation of the change in volume
of concrete with a change in pressure.
For compacting aggregate in steel container or
concrete sample in cube/cylinder mold.
Steel construction 50 x 50 cm table Separate
control box, variable speed up to 3.600 rpm.
ASTM C-617
Equipment for forming caps on ends of 15 diameter
concrete cylinder to provide uniform loading surface
for compression test.
For measuring average axial deformation of concrete
cylinder sample during compression test, cast alumunium,
dial indicator 5 x 0.001 mm.
For mixing trial bathes of concrete for mix design,
Approx 70 ltr capacity, 4 mixing blades, welded
steel frame, 2 wheels for easy movement,
electromotor 1/3 HP, 220 V-AC, 1 For Phase.
