SPECIFICATION
MIL MATE
This mill mate has been provided, position the lifting cradle
under the bowl, and using the thumb buttons to control the lift,
manuever the bowl out of the mill and swing it into position on
the bench.
POWER SOURCE : Electromotor 3 Phases
3 Hp / 4 Pole / 220 / 380 V
Vertical
This Pilverizing Mill could grind 2 kg sample (200 mesh)
within 5-10 minute depending the hardened or the sample
the grinding head made of special K iron steel.
There are three option : C. 2000
C. 1000
C. 1800
LABORATORY SHAKING TABLE
FIELD SHAKING TABLE
SPECIFICATION
POWER SOURCE : Electromotor 1 Phases
1,0 Hp / 0,5 kw
110-220 V, 50 Hz, 4 Pole
CAPACITY : 50 kg / 15 kg / 8 kg;
TRUN TABLE : 40 Rpm;
8 PCS SAMPLE SEGMENT OF STAINLESS WITH ELECTRIC
VIBRATOR
SPECIFICATION
POWER SOURCE : Electromotor 1 Phases;
0,5 hp / 0,37 KW;
110-380 V, 50 Hz, 4 Pole;
MOTION : Circular : 246 Rpm;
TAPS : 65 Taps/min;
CAPACITY : 6 Sieves and 1 pan and Cover 8" Dia.
SPECIFICATION
POWER SOURCE : Electromotor 3 Phases 2 Hp / 1,5 KW;
LOW VOLTAGE : 220 - 380 V / 50 Hz 2 Pole;
HAMMER BLADE : 8 Pieces made of Special Steel Grade ;
MILL ROTAGES : 9500 Rpm;
SCREEN : 0,58 Perforation;
CAPACITY : 4 Liters
SPECIFICATION
GEAR MOTOR : Single Phase 1/2 HP / 220 - 240 V;
50 Hz, Ratio 1 : 15;
OUT RPM : 93 Rpm;
CAPACITY : 50 kg/hour
SPECIFICATION
DRIVE MOTOR : 3 hp/2,2 KW
1500 Rpm. 3 Phases
220 - 380 V, 4 Pole / 50 Hz;
10 to 50 KG / hour dependent of setting of discharge GAP,
feed size, Bulk Density and Crushing Properties of Material High
Dust Tighty Hon Sung For easy cleaning.
Heavy Duty frame shaft and bearing pression machined cast
Grinding, plastic, Fine Adjustment on Grinding Plate including
Instalation / Electrical Wiring, Test Run.
SPECIFICATION
POWER SOURCE : 2 Set Speed Reducer :
3 Phases 2 Hp, 220 V / 380 V / 50 Hz;
ROTAGE ROLL : 90 Rpm / minute;
ROLLER : 2 Pieces Roller dia 400 x 200 mm,
made of special Steel Grade;
CAPACITY : 1000 kg / hour
Precision measuring device, high grade steel with plated finishing 3/4" tape hole at both end. Supplied complete with dial and calibration chart
