DTS (Digital Touch Screen) Compression Machine will give you an interesting testing experience. The combination of stability,
rigidity and coupled with a KMS unit will make it easy for you to test your samples. KMS units are equipped with features
such as real time visualization of value and graphs, automatic data storage, automatic recording for peak loads,
automatic stress value calculations, and more.
The California Bearing Ratio is a measure of the strength of the subgrade of a road or other paved area, and of the materials
used in its construction. The ratio is measured using a standardized penetration test first developed by the California
Division of Highways for highway engineering. The laboratory test method in ASTM D1883 and AASHTO T 193 for the CBR test
is a simple empirical method, comparing resistance to penetration of the test specimen to that of a “standard” sample of
well-graded crushed stone material using a standard-sized piston
This 300 kgf capacity machine, designed primarily for Triaxial testing of soil specimens up to 50 mm diameter. Comprises
a rigid twin column construction with fully variable speed of 0.0001 - 0.2 inch/min. All readings are digital except the volume
change units. 7 segment displays are used for load, cell pressure, back pressure, and pore pressure values. The LCD display
is used to adjust the speed according to testing needs
Sieve shaker is a part of aggregate testing to determine size distribution of the fines. They are widely used in particle size
testing of mineral aggregates and for sieve gradations of many other granular materials. This Orbital Sieve Shaker from
Panairsan have feature a back-and-forth lateral motion combined with up/down and tilting actions. The combination
of actions moves the test specimen in orbit on the sieve cloth
This machine used to determine the unconfined compressive strength (UCS) of cohesive soil in the undisturbed,remolded,
or compacted condition, using strain-controlled application of the axial load. This is a digital version that has been combined
with the KMS V2 data logger. There are 14 speed type options based on the percentage (0.5%, 1.0%, 1.5%, and 2.0%) of
variation in sample height
Automatic CBR / Proctor compactor is designed to compact CBR / Proctor specimens. The use of an automatic compactor,
will show considerable cost benefits over hand compaction methods. The program application software allows to select
and perform different compaction cycles in fully automatic system and complies with the mentioned International
Standards. Complies to ASTM D1577, ASTM D1883, ASTM D698, AASHTO T180, AASHTO T193, AASHTO T99, SNI 1742, SNI 1743 (available to request the other Standard)
Technical Specifications
Manual Test Hammer is the traditional instrument used for
the non-destructive testing of hardened concrete.
This easy-to-use instrument provides a quick and simple
test for obtaining an immediate indication of concrete
strength in various parts of a structure.
The minimum verifiable strength is 1400 PSI (10 MPa)
Digital Test Hammer is and advanced completely
automated system for estimating concrete compressive
strength. Its calculation, memory and recording functions
allow for suick, easy and accurate test results.
Discard values for multiple test results can be set; the mean,
median and compressive strength can also be calculated.
The addition of modern microprocessor technology allows the
data to be stored, printed and transferred to a personal computer
for further analysis, or inclusion in your reports.
The unit comes wirh an integraed alpha - numeric digital display,
and control panel. Can switch between standard or metric units.
The field printer mounts on the ease of use/
Connection to a personal computer is via the RS-232 interface.
Display : 2x16 trans-reflective
Construction : All aluminium for rugged construction environment
Operating temperature : 0O to 50o C (32o to 122o F)
Batteries : 2 'AA'
Ap. Size : 100mm x 100mm x 270mm (4" x 4" x 10")
Weight : 1.6 kg (3.5 lbs)
Printer Size : 64mm x 49mm x 31mm (2.5" x 1.9" x 1.2")
Weight : up to 0.270 kg (0.6 lbs) with paper
Battery : Internal lithium ion with 1 yr approximate life
Charger : 100V AC - 240 V AC 5V DC 3.0A
Operating Temperature : 32 to 122 oF (0 to 50 oC)
Software :
Windows PC Compatible
RS-232 interface required
It is recommended that calibration of the test hammers
be checked regularly - usually after about 2000 strokes.
Cooper Technology’s New Generation Pressure Aging Vessel (CRT-PAV1) uses heated, pressurised air to simulate longterm
oxidative aging of asphalt binders. The PAV consist of an ASME Boiler and Pressure Vessel Code and CE certified
stainless steel pressure vessel, steel cabinet with encased band heaters, and integral pressure measurement control.
This state of the art system meets ASTM D6521, AASHTO R28, and EN 14769 requirements and includes a platinum RTD
device to ensure accurate temperature resolution and uniformity. A pressure relief valve and high- temperature thermal
shut-down are included as standard safety features. A USB port located on the front of the unit allows the user to
easily store test data and upgrade software when necessary.
The CRT-PAV1 Pressure Aging Vessel uses a Touch-screen controller with front panel user interface for complete control
and monitoring of all test processes. The system has an operating pressure range of 2.1 ±0.1mPa and temperature
range of 80°—115°C, with resolution of 0.1°C.
This easy-to-use system completes a test in three simple steps:
1. set the temperature and pressure
2. insert specimens
3. press the start button
The CRT-PAV1 includes a set of ten specimen pans, a precision anodized aluminum sample holder with lifting
handle, and a specimen handling tool. Additional pans can be ordered as necessary. Compressed air with a pressure of
at least 350psi (2.4MPa) and a regulator must be user provided.
